Capsule Technical Specifications
Configuration options for Research Capsules:
- Data Capsule Image: there are two images (versions) of the standard Capsule desktop, one that comes pre-loaded with sample volumes from the HathiTrust and one that does not
- Virtual Machine CPUs (VCPUs): the number of virtual machine processors from 2-4 VCPUs for the Capsule
- Memory: between 4GB and 16GB
Data Capsules can be shared between up to 5 collaborators. The person who creates the Capsule has the most control over it, and they can add and remove other collaborators, assign permissions, and delete the Capsule.
There are 3 roles for users of a shared Capsule:
- Owner (and Owner-Controller): By default each Capsule creator will get this role. It comes with the highest level of control. The Owner-Controller is able to perform all Capsule functions available in HTRC Analytics, including accessing, starting, stopping, switching modes, deleting, and managing the collaborators on the Capsule. By default the person who creates the Capsule will be the Owner-Controller until they delegate control of the Capsule to a collaborator, at which point their role becomes Owner and the ability to start, stop, and switch the modes of the Capsule moves to the Controller (see below). The Owner can resume Owner-Controller status whenever they choose.
- Contributor: The Owner can share their Capsule with other HTRC Analytics users. New collaborators have the role of Contributor when they are added. This role has the lowest permission level. Contributors can connect to and conduct research in the Capsule, but cannot perform any of the Capsule management functions.
- Controller: The Owner can choose to give a Contributor the status of Controller in order to delegate some management tasks of the Capsule to that user, including starting, stopping, and switching modes. There can only be one Controller at a time, and the Owner can revoke control of the Capsule at any time.
For Capsules with full-corpus access, HTRC will review the request to add a collaborator and either approve or deny it. The Capsule details will only appear on their Capsules listing page if the request is approved.
Pre-installed Software, Libraries, and Data
Each Capsule comes pre-loaded with the following software, libraries, and data. For more information, consult the ReadMe file on the desktop of your Capsule for more details about installed packages.
|Anaconda 3||4.2.0||https://www.continuum.io/anaconda-overview||Supports both Python 2.X and 3.X. See list below for the Python libraries pre-installed (some via Anaconda)|
|InPho Topic Explorer||https://inpho.github.io/topic-explorer/||Project website: https://www.hypershelf.org/|
- GenSim (currently running with warning)
- 3 sample HTRC worksets of 1000 volumes each: U.S. Government Documents, German language volumes, 19th Century English Literature.
There is an overall disk quota, a memory quota, and a CPU quota for each user in the Data Capsule environment. One user can consume up to 100 GB of disk space, ~20 GB of memory, and 10 CPUs. If you attempt to create a second or third Capsule that exceeds your quota in one of the areas above, then you will encounter an error.
Capsule Recall Practices
The HTRC Data Capsule service’s maximum capacity flexes depending on the size of the Capsules it hosts. In the event that the Data Capsule service cannot satisfy all simultaneous demands for Capsules:
A Capsule may be recalled (i.e. deleted) and the work environment will no longer exist.
Capsules will be identified for recall based on criteria such as date of last use and an individual’s resource usage, with the goal being to extend the number of individuals afforded the opportunity to conduct research using a Capsule
A researcher whose Capsule is identified for recall will be notified via email regarding the pending recall, and they will have 5 days to respond to the recall notification.
Priority in satisfying a new request for a Capsule will be given to researchers whose affiliated organization is a HathiTrust member.
At times when the Data Capsule service has reached capacity, incoming requests for Capsules will be screened based on institutional affiliation.
Instructors who intend to use the HTRC Data Capsules in a course should contact email@example.com so that proper arrangements can be made.
Using an HTRC Data Capsule
Administering a Capsule
Use the HTRC site to handle administrative tasks for your Capsule:
Create - a Capsule is created, but it is not yet running
Start - turn the Capsule on in maintenance mode
Stop - shutdown a Capsule
Delete - the Capsule is deleted (including its data and settings)
Switch modes - change the Capsule from maintenance to secure mode, or vice-versa (see below)
See status - view your Capsules and their statuses
Interact - use your Capsule either through a desktop view or a terminal (command line) view
Maintenance vs. Secure Mode
The Capsules are configured with special security settings that allow you to interact with them in two modes: maintenance mode and secure mode
- In maintenance mode, you are allowed to access the network freely and install whatever software you want.
- In secure mode, general network access is restricted, but you can access the HTRC corpus repository, which is otherwise blocked. Any changes you make to the Capsule in secure mode will not persist. To save data from your analysis, you'll need to save your results in the secure volume storage on your Capsule. This storage option is not visible in maintenance mode.
Interacting with a Capsule
Access your Capsule in-browser from HTRC Analytics either by viewing the Remote Desktop (both modes available) or the Terminal command line interface (Maintenance Mode only). Earlier versions of the Capsule environment required a VNC viewer and passwords for both the VNC and the Capsule's operating system; those requirements are removed in the web-based version that was implemented in August, 2018.
You can also SSH into your Capsule in Maintenance Mode only if you've followed the directions under "Advanced Features" to set-up a public key.
To operate your Capsule, click on the Capsule ID from the Capsule list page. Then choose to either view the remote desktop or the terminal. The terminal will work in Maintenance Mode only.
If you've established a key for SSH access, you can also SSH into your Capsule when it's in Maintenance Mode by using the command viewable under "Advanced Features" on an individual Capsule's status page.
Importing data to a Capsule
Use the HTRC Workset Toolkit to import HathiTrust text data into your Capsule. Any outside data you plan to analyze in conjunction with HathiTrust data can be added to your Capsule from a web-accessible location when your machine is in Maintenance Mode.
Earlier versions of the Capsule environment required passwords for both the VNC and the Capsule's operating system; those requirements are removed in the web-based version that was implemented in August, 2018. If you use the included HTRC Workset Toolkit when in your Capsule to import data to your Capsule, you will be prompted for your HTRC Analytics username and password.
Generic Research Workflow
Create and start a Capsule in the HTRC
View your Capsule using the Remote Desktop view or Terminal view.
Configure the software environment of the Capsule as needed. Download the scripts or programs you plan to use in your analysis
Switch Capsule to secure mode through HTRC
Run your against the secure HTRC corpus repository
Move your results to the secure volume storage on the Capsule
Switch Capsule back to maintenance mode to regain normal network access
Non-consumptive Exports from an HTRC Data Capsule
Data and tools can easily enter a user's Capsule, but anything leaving a Capsule must undergo review prior to release to the user. The guidelines used during review of the outputs of a Capsule are as follows:
- Files containing any OCR text or images of pages or volumes will be prohibited from leaving a Capsule.
- Binary files are prohibited from leaving a Capsule
- Encrypted files are prohibited from leaving a Capsule
- PDF files or other format of file that contains images of OCR text or text images are prohibited from leaving a Capsule
- For any Capsule results directory that exceeds 1 MB in total, the collection will not be released pending discussion with the Capsule owner
The general rule-of-thumb is whether the export would create a substitute for human-reading the original text. (The full Non-Consumptive Use Research Policy is also available for your reference.) If you would like someone to pre-review a sample file that would represent the kinds of data you would like to export from a capsule before you begin your work, please contact firstname.lastname@example.org.
A release request must be under 67 MB, and any submitted requests over this size will fail due to technical limitations.
Release requests should include a README text file describing the files included in the request and their data structure.
If you have a directory of results files that you would like to export to be released, you can zip the directory and export the compressed file.
You will receive an email notifying you if your results export has been approved. The link for downloading results that have been approved for export will appear on the landing page for your capsule. Each approved request will be available for 2 weeks from the approval date. All collaborators on a capsule will get notification that approved results are ready, and will find the released results available to them on their capsule landing page.